Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

This study was conducted to test the hypotheses that a forest managed by selective cutting can store more carbon than a forest managed by clearcutting. The study was carried out as a meta-analysis. The data that was found was analyzed by performing t-tests on the proportional effect that the two silvicultural methods had on the driving factors of CO2-efflux and carbon stores in coniferous boreal forest. In all areas tested, an effect in favor of selective cutting was found, but not all of them significant however. The soil respiration following selective cutting was significantly lower than that of clearcutting, and the primary production of a clearcut area cannot according to reason exceed that of an area post-selective cutting.

The study is made on behalf of SCA Skog Jämtlands förvaltning which is one of five administration units that SCA Skog consists of. The purpose of the study is to investigate which reduced expenses there are according to spatial concentration of cutting areas. By increasing the spatial concentration of cutting areas it will reduce the need of movements by trailer, also reduce the number of roads that you use during the activities. To be able to perform the study, access to a annual cuttings in nine years have been made available. From this volume new annual cuttings has been created but more concentrated. The two different results have been compared and the results show that concentration of cutting areas generates reduced need for trailer transports and less km road that has to be maintained. But then, if it´s practical viable can be discussed.

Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

The Swedish censorship is an institution run by the Swedish government since 1911 and has cutting films to protect the citizens from unnecessary violence. Their main purpose doesn't work well with the law of copyright in literary and artistic works, as they break this law while cutting movies. They therefore destroy the authors work by doing this, and in this thesis I will point out how they have destroyed the purpose of two scenes in the film Hellraiser and by that, more or less, altered how the audience may look upon two of the characters in the film.  The results points to the unnecessary way of physically cutting films to protect the audience, but also how they choose to work and what preferences they used in their line of work..

This essay is divided in several different parts, but all are tied up together by a fact that we want to increase productivity. We hope to do that by programming the PLC and to reach this with a better security for the person how are going to handle the cutting machine under it?s cutting process. We should as well look for some other ways to come up with better instructions and way to work and handle yourself during work. This programming is done in GRAPH7.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

Forestry affects most of the forest-covered land in Sweden. In the landscape, the most common stream type is headwaters, which are important sites for many processes and organisms in both the terrestrial and the aquatic ecosystems. The aim of this study was to investigate how the abundance of benthic invertebrate functional feeding groups in headwater streams develops after clear-cutting and if it also is possible to detect a change in the composition of feeding groups. The study also attempts to determine what factors have an effect on temporal changes in abundance of these groups. For the study, 11 sites in northern Sweden were sampled for benthic invertebrates using a Surber-sampler, and for each site canopy-cover and pH was obtained.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..